Drafting

IDCS takes the extra step at the beginning of the project to understand the Client’s list of Drafting Standards and Procedures. Strict adherence to Standards is the utmost importance to ensure the quality and appearance of IDCS’ drawings will integrate into the entire team’s set of drawings seamlessly. We value our one-on-one communication skills with the Project Manager to ensure we are creating the best drawings possible.  IDCS is proficient in both Autodesk and Microstation software.

Evanston Water Utility Arc Flash Study
Evanston Water Utility Arc Flash Study

IDCS was a sub-consultant on the City of Evanston Water Utility electrical hazard assessment. The project included the assessment of the entire water treatment facility, and furnishing the required field markings (labels) for the electrical distribution equipment.

Tags: Water & Wastewater, Vulnerability and Risk Assessments, Green Infrastructure, Arc Flash and Coordination Studies, Drafting, City of Evanston, Greeley & Hansen, Evanston IL
Repair of Electrical Infrastructure Systems 5th Medical Group, Minot AFB
Repair of Electrical Infrastructure Systems 5th Medical Group, Minot AFB

IDCS worked as a sub-consultant to SpecPro for power studies for an Air Force base located in Minot North Dakota. Utilizing SKM software IDCS completed a short circuit study which included over 300 bus points from the incoming service entrance to the panelboard distribution level.

Tags: Government, Vulnerability and Risk Assessments, Green Infrastructure, USACE, SpecPro, Minot ND, Arc Flash and Coordination Studies, Drafting
Des Plaines Inflow Tunnel
Des Plaines Inflow Tunnel

IDCS will be responsible for the preliminary and detailed design of certain components of the Des Plaines Inflow Tunnel.

Tags: Water & Wastewater, Electrical Design, Instrumentation Design, Green Infrastructure, Black and Veatch, Drafting, MWRDGC
Indiana Harbor Control WWTP
Indiana Harbor Control WWTP

IDCS completed the Electrical and Instrumentation design for a new wastewater treatment facility for the treatment of contaminated groundwater, as well as the associated new Administration and Maintenance Buildings.

Tags: Water & Wastewater, Construction Services, Electrical Design, Green Infrastructure, Drafting, USACE, MWH, East Chicago IN
TARP Control Structure Rehabilitation and South Park Control Structure Improvements
TARP Control Structure Rehabilitation and South Park Control Structure Improvements

Tunnel and Reservoir Plan (TARP) is the system which MWRDGC developed in 1972 as a cost-effective way to comply with Federal and State water quality standards in the 375 square miles of combined sewers in the Chicagoland area (including 51 suburbs).

Tags: Water & Wastewater, Vulnerability and Risk Assessments, Electrical Design, Instrumentation Design, Green Infrastructure, MWRDGC, Donohue, Chicago IL, Drafting
Upper Des Plaines Pumping Station
Upper Des Plaines Pumping Station

The project was a complete study and rehabilitation of a major pump station serving the Upper Des Plaines River service area, and installation and control of a bypass to the TARP System to accommodate emergency events. IDCS was responsible for all Electrical and Instrumentation studies, as well as design and construction services on this major project.

Tags: Water & Wastewater, Electrical Design, Instrumentation Design, Vulnerability and Risk Assessments, Construction Services, MWRDGC, MWH, River Forest IL, Drafting
Salt Creek Wastewater Treatment Facility
Salt Creek Wastewater Treatment Facility

The Salt Creek Wastewater Treatment Facility was expanded. The instrumentation and electrical systems were designed by IDCS. The existing incoming primary and emergency power sources were evaluated for compliance with the 10 States Standards and recommendations were made for the required upgrades to the existing system.

Tags: Water & Wastewater, Electrical Design, Instrumentation Design, Construction Services, Green Infrastructure, SCSD, Deuchler WEDA, Villa Park IL, Drafting
Primary Sludge Pumps
Primary Sludge Pumps

IDCS designed the replacement of the existing positive displacement pumps with new rotary lobe pumps with variable frequency drives (VFDs). The system included a new seal water system, sludge flow meter, and suction and discharge pipe line protection.

Tags: Water & Wastewater, Electrical Design, FMWRD, Deuchler WEDA, Oswego IL, Drafting
Albany Park Stormwater Diversion Tunnel
Albany Park Stormwater Diversion Tunnel

The Albany Park Stormwater Diversion Tunnel project consists of a 5700 foot long 18 foot finished diameter rock tunnel located beneath Foster Avenue in the City of Chicago.  This tunnel will divert excess stormwater from the North Branch of the Chicago River (NBCR) to the North Shore Channel (NSC).   IDCS was responsible for all power, lighting, and security camera design for the pump station and the inlet, as well as the control design which needed to be coordinated between both the City of Chicago Department of Transportation and MWRDGC. 

Tags: Water & Wastewater, Electrical Design, Instrumentation Design, CDWM, Drafting, MWH, Chicago IL
Stickney Water Reclamation Plant Phosphorus Recovery Plan
Stickney Water Reclamation Plant Phosphorus Recovery Plan

Owner:  MWRDGC.  Client:  Black and Veatch.  Location:  Chicago, IL.  Services:  Instrumentation Design and Drafting.

Tags: Water & Wastewater, Instrumentation Design, Green Infrastructure, MWRDGC, Black and Veatch, Chicago IL, Drafting
New Battery E Facilities at the North Side Water Reclamation Plant
New Battery E Facilities at the North Side Water Reclamation Plant

IDCS provided CAD work support for AECOM to generate a preliminary design for an expansion of aeration systems at the Terrence J O'Brien WRP.

 

Tags: Water & Wastewater, Green Infrastructure, MWRDGC, AECOM CTE, Chicago IL, Drafting
OHare Firefighter Simulator Building
OHare Firefighter Simulator Building

IDCS was responsible for providing the design of the Electrical Distribution and Lighting Systems for a new Firefighter Simulator Building for the City of Chicago at the O'Hare International Airport. The building was approximately 3,000 square feet and included an 18' high simulator area.

Tags: Government, Electrical Design, Instrumentation Design, Green Infrastructure, CDA, Hyre Electric Company, Bensenville IL, Drafting

Locations

Chicago Office
200 West Adams
Suite 1825
Chicago, Illinois 60606
708.445.7537

St. Louis Office
500 N. Broadway
Suite 1450
St. Louis, MO 63102
314.549.4404

Connect with Us

Visit IDCS, LLC on Linkedin LinkedIn

Visit IDCS, LLC on Twitter Twitter

Visit IDCS, LLC on Google+ Google