There are 39 item(s) tagged with the keyword "Instrumentation Design".
Displaying: 11 - 20 of 39
IDCS involvement at Wilmette Pump Station consisted of the complete demolition and design of a new incoming utility service to replace the existing service which had passed its useful life expectancy, replacement of 1966 era substation transformers and their associated primary circuit breakers, replacement of the lighting system within the building as well as on the exterior, new controls of the gate structures (including lighting above the new gate control bridge), design of an annunciator for communication with the public during gate operations, a new control system, with communication and control from both the Main Waterways Control Center and North Side Water reclamation plant.
IDCS was contracted to perform Electrical Engineering Services for the Condition Assessment of the South Water Purification Plant
The Maline Creek Local Storage Facility Tunnel (MCT) and Tunnel Dewatering Pump Station (MCTDPS) is designed to relieve the Bissell Point North Interceptor Tunnel during high flows and store 12.5 MGD until the flows recede.
Division XI is a state of the art 640,000 square foot, medium-security facility. Consisting of central core surrounded by four housing PODS, Division XI can house 1,536 male detainees.
IDCS was responsible for providing the design of the Electrical Distribution and Lighting Systems for a new Firefighter Simulator Building for the City of Chicago at the O'Hare International Airport. The building was approximately 3,000 square feet and included an 18' high simulator area.
IDCS was retained by KJWW to provide the electrical design for the replacement of two electric chillers at the Cummins Life Science Center on the University of Chicago Campus. The work included new 4160V feeds, and starters for the 1,020-ton chillers.
The Albany Park Stormwater Diversion Tunnel project consists of a 5700 foot long 18 foot finished diameter rock tunnel located beneath Foster Avenue in the City of Chicago. This tunnel will divert excess stormwater from the North Branch of the Chicago River (NBCR) to the North Shore Channel (NSC). IDCS was responsible for all power, lighting, and security camera design for the pump station and the inlet, as well as the control design which needed to be coordinated between both the City of Chicago Department of Transportation and MWRDGC.
Intelligent Design and Construction Solutions, LLC completed the instrumentation and control design for the disinfection system at the Bissell Wastewater Treatment Plant. There are two disinfection systems at Bissell WWTP, both of which utilize a chlorination/dechlorination chemical system.
Complete Electrical and Control design for the addition of an Emergency Pump Station and improvements to the plant effluent for the Fox Metro Water Reclamation District Wastewater Treatment Plant.
IDCS will be responsible for the preliminary and detailed design of certain components of the Des Plaines Inflow Tunnel.
Displaying: 11 - 20 of 39